0 item(s) / Total: $0  
Home > Lab & Test Equipment > Data Acquistion Cards

Contec PO-64L(PC) Data Acquisition Card Digital I/O

Part Number CONTEC-PO-64L-9861A
Contec PO-64L(PC) Data Acquisition Card Digital I/O
Contec PO-64L(PC) Data Acquisition Card Digital I/O
Your Price:  
Share |
This card is an ISA card with 64 Opto isolated digital outputs

This Digital I/O (Data Aquisition) card was removed from a test fixture (rack mount PC) and appears to be in good condition.
You will recieve card in static bag. No cables are included.
Documentation and drivers are available on manufacturers web page.

Manufacturer: Contec
Model Number: PI-64L(PC)
Version: 9860

Below is information on this card gathered from the manufacturers web page http://www.contec.com

64 opto-isolated digital outputs
Signal level: +12 - 24 VDC
High sink current: 35VDC, 100 mA/ch (max) 2A max. per group
Photo-insulated outputs provide improved noise reduction
Additional board functions include: Bit output, Output data read back

Type: Opto-isolated open collector current-sink (negative logic) 16 channels one common
No. of channels: 64
Output rating: +35 VDC, 100mA/ch (max) 2A/common (max)

I/O address: Any 8-byte boundary (normal) any 16-byte boundary (optional)
Throughput rate: 1msec (max)
External power: +12 to 24VDC (+-15%)
Power consumption: +5 VDC 100mA (max)
Operating temperature: 0~50'C
Operating humidity: 20~90%RH (no condensation)
Dimensions: 6.3" x 4.8" (160mm x 122mm)

Software can be written in DOS (GW-Basic), ActiveX, DDE Com, LabVIEW

We do not have the equipment to test this board and it is sold as is

Shipping weight is 2 lbs.