This card is an ISA card with 64 Opto isolated digital inputs
This Digital I/O (Data Acquisition) card was removed from a test fixture (rack mount PC) and appears to be in good condition.
You will receive card in static bag. No cables are included.
Documentation and drivers are available on
manufacturers web page.
Manual:
http://www2.contec.co.jp/dl_data/LZP831/LZP831_000215.PDF (PDF)
Manufacturer: Contec
Model Number: PI-64L(PC)
Version: 9860
Below is information on this card gathered from the manufacturers web page http://www.contec.com
64 opto-isolated digital inputs
External power supply requirement: +12-24 VDC
4 interrupt signals
Bit input function
Digital filter for input signals
Handshake filter for input signals
INPUTS
No. of channels: 64
Type: Opto-isolated current-source type inputs (negative logic) 16 channels share a positive common
Input resistance: 3kO
Current ON: 3.1mA (min)
Current OFF: 0.16mA (max)
Interrupts: Four interrupts use up to four IRQs at a time IRQ3-7, 9-12, 14 and 15
Interrupt events for General Purpose Input: Falling edge
Interrupt events for Optional Functions: Both falling edge and rising edge
GENERAL
Throughput rate: 1msec (max)
External power: +12-24 VDC (+-15%) 4mA/12V to 8mA/24V per input channel
I/O address for General Purpose Input: Any 8-byte boundary
I/P address for Optional Functions: Any 16-byte boundary
Power consumption: +5VDC 100mA (max)
Operating Temperature: 0 to 50'C
Relative Humidity: 20 to 90% (No condensation)
Weight: 3.53oz (100g)
Dimensions: 6.3" x 4.8" (160mm x 122mm)
Software can be written in DOS (GW-Basic), ActiveX, DDE Com, LabVIEW
We do not have the equipment to test this board and it is sold as is
Shipping weight is 2 lbs.
