0 item(s) / Total: $0  
Home > Lab & Test Equipment > Data Acquistion Cards

Contec DA12-6LC (PC) Data Acquisition Card Digital I/O 9923D

Part Number CONTEC-DA12-NO9923D
Contec DA12-6LC (PC) Data Acquisition Card Digital I/O 9923D
Contec DA12-6LC (PC) Data Acquisition Card Digital I/O 9923D
Your Price:  
Share |
This card is an ISA card with 6 12bit Digital to analog outputs and 24 Digital I/O channels (i8255 compatible)

This Digital I/O (Data Aquisition) card was removed from a test fixture (rack mount PC) and appears to be in good condition.
You will recieve card in static bag. No cables are included.
Documentation and drivers are available on manufacturers web page.

Manufacturer: Contec
Model Number: DA12-6LC(pc)
Version: 9923D

Below is information on this card gathered from the manufactueres web page http://www.contec.com

6 independent D/A outputs
24 programmable digital I/Os
High speed D/A conversion: 4usec
Independent output range settings per output 0~5V, 0~10V, +-2.5V, +-5V, +-10V or 4~20mA
Simultaneous D/A conversion mode

No. of channels: 6
Range: 0~5V, 0~10V, +-2.5V, +-5V, +-10V, 4~20mA
Voltage: +-5mA max.
Impedance: 0.1O (max)
Resolution: 12-bit
Conversion rate: 4usec/channel (max)
Non-linearity error: +-3LSB max. (at 25'C)
Method: DAC-80N equivalent, external double buffered latch, transparent or synchronous output (jumper selectable)
External Voltage: +6 VDC (min), +36 VDC (max)

Type: TTL level, bi-directional 8255PPI
No. of channels: 24

I/O addresses: Any 16-byte boundary
Connector: 37-pin D-type male
Power consumption: +5VDC 700mA max., +-12VDC 1200mA
Dimensions: 13.4" x 4.2" (340.5mm x 107.0mm)

Software can be written in DOS (GW-Basic), DDE Com, LabVIEW

We do not have the equipment to test this board and it is sold as is

Shipping weight is 1.5 lb.