AtMega-Lite Development Board Developed and Manufactured By GizmosUSA.com
Item Description, Features, and Specifications:
The AtMega-Lite is a module allowing for rapid development
of ATMega8/88/168/328 parts on a breadboard.br>
The main features include the following:
• Thru-hole technology for easy breadboard use
• Can be used as a STAMP type application. (Unit is not
compatible with basic stamps)
• Socket for ATMega8/88/168/328 DIP package parts
• 6 pin ICP/ISP In Circuit/System Programming Port
standard connector as used on Atmel STK500 programmer
• 6 pin TTL serial connector with FTDI 232-R cable pin out
• On board 16mhz resonator and reset switch
• All pins of IC are routed to breadboard header for easy use
• Compatible with Arduino, Bascom and other Boot-loaders
Assembly required.
Kit includes:
ATmega-lite board
0.1 uF (104 markings)
0.01uF (103 markings)
3mm red LED
28pin socket
40x1 pin female socket
40x1 pin male header
2x3 header
10k ohm (reset pull up, 1/8 or 1/4 watt)
330 ohm (LED limiter, 1/8 or 1/4 watt)
reset switch
16mhz 3pin resonator
Item Condition:
New
You will Receive:
(1)AtMega-Lite Development Board Developed and Manufactured By GizmosUSA.com
Item Weight:
Item weight is approximately 0.03 pounds.
TTL Serial header pinouts (for communicating with serial or bootloader)
1 = Ground
2 = CTS#
3 = VCC (5v)
4 = TXD (transmit)
5 = RXD (receive)
6 = RTS#
ISP 6pin header (for programming chip)
1 = MISO
2 = VCC (5v)
3 = SCK
4 = MOSI
5 = Reset
6 = GND
