64x 128 Planar STN Graphics Matrix LCD module
Item Description, Features, and Specifications:
This is a brand new, 64 x 128 yellow mode positive image
transflective and utilizes an edge lit backlight with yellow-green LEDs.
Blue pixels on Yellow/green background)
Features:
Planar Systems, Inc. Part Number: 997-1857-00
Schneider Electric Part Number: 51005307
3.0 LCD Module Characteristics
Operating Temperature -30 degrees Centigrade to +85 degrees Centigrade
Storage Temperature -40 degrees Centigrade to +85 degrees Centigrade
Drive Method Multiplexed 1:64, 1/6 Bias
Interface Parallel 8 bit, Motorola 6800 format
LCD Controller/Drivers Samsung S6B0107B01-C/S6B0108A01-C COB
Backlight Type Top Edge Lit (Green) (See LED backlight schematic (Sec. 5.2))
Backlight Control & Adjustment Customer Supplied Current Limiting Resistor (off-board)
Temperature Compensation On-Board Automatic
Specifications:
Contrast Adjustment On-Board Automatic
Module Supply Voltage: VDD = +5.1 VDC ±10%
Module Supply Current: 3.4mA Typical
Backlight Supply Voltage: 4.2V Typical; 4.6V Maximum
Backlight Supply Current: 75mA Maximum
LCD Format: Graphic 64 pixels X 128 pixels
LCD Type Yellow Mode STN Positive Image Transflective
(Blue Pixels on Yellow/Green Background)
Active Image Area: 27.5 mm X 55.0 mm
Optimized Viewing Angle: 6:00
Connector Type: 2mm SIP
Connector Manufacture and P/N Samtec: TMM-120-02-G-S
Mating Connector: Samtec SMM-120-02-S-S
Frame Rate: Approximately 70fps
Pinout for Planar LCD:
1: VEE (LCD Voltage)
2: GND (Ground)
3: DB0 (Data Bit 0)
4: DB1 (Data Bit 1)
5: DB2 (Data Bit 2)
6: DB3 (Data Bit 3)
7: DB4 (Data Bit 4)
8: DB5 (Data Bit 5)
9: DB6 (Data Bit 6)
10: DB7 (Data Bit 7)
11: VDD (+5 Logic Supply)
12: RS (Register Select)
13: E (Enable Clock)
14: R/W (Read/Write)
15: /RST (Reset) (Active Low)
16: /CS1 (Chip Select 1) (Active Low)
17: /CS2 (Chip Select 2) (Active Low)
18: N.C. (No Connect)
19: +BKL (Backlight Positive Voltage)
20: -BKL (Backlight Negative Voltage)
Item Condition: New old stock. Not in original packaging. Bare unit only.
You will Receive:
(1) 64 x 128 Planar (PN: 997-1857-00) Graphics LCD.
Item Weight:
Item weight is approximately 0.16 pounds.
